City Expert Finds Chevron’s Pipe Material Consistent with Industry Standard
The city’s metallurgical consultant wrote in a report submitted to City Manager Bill Lindsay Tuesday afternoon that Chevron’s choice of piping to replace the No. 4 crude unit at the Richmond refinery is “consistent with industry standards.”
Chevron submitted plans detailing recommendations for repairing the piping in the refinery to Lindsay on Dec. 12. The company’s analysis argued that making the new pipes of 300-series stainless steel, as the U.S. Chemical Safety Board has suggested, would introduce “a new damage mechanism” that would create a problem even more difficult to monitor and inspect than the sulfidation corrosion blamed for the Aug. 6 refinery fire.
James McLaughlin, a consulting engineer for the city, said in his letter Tuesday that Chevron’s preferred material, 9-chrome alloy, follows industry practices. He concluded that Chevron’s report was “sufficiently complete” to comply with the California Fire Code.
The city’s peer reviewer also had findings consistent with McLaughlin’s. “Based on the information contained in Chevron’s technical report, it is my opinion that Chevron’s logic and procedures used in their materials selection process is consistent with industry practice,” David E. Hendrix wrote in a letter sent to the city Tuesday.
Hendrix is president of the Hendrix Group, Inc., a material engineering consulting group, based in Houston, TX.
The technical analysis from Chevron and the city consultant’s response come before a council-ordered public meeting on Wednesday night meant to provide “transparency in the permitting process.”
Lindsay emphasized that building permits will not be issued for the repair of the damaged piping in the crude unit until after Wednesday’s meeting.
Congressman George Miller also weighed in on the piping issue Tuesday, saying he believed that Chevron had made a decision on the what piping material to use “even before the damaged piping had been removed for testing,” Miller wrote in a letter to the Richmond City Council.
Miller also criticized Chevron’s call for “timely action” on the permit process while they have been slow to share details with the public and respond to the CSB.
“Expediency should not be allowed to override transparency of the decision making process or concern for worker and public health and safety,” Miller wrote.
According to his resume, James McLaughlin, a material engineer at Becht Engineering Co., Inc., has more than 30 years of experience in the petroleum industry, specifically with issues of corrosion prevention, failure analysis and “fitness-for-service assessments in the entire range of equipment in refineries, petrochemical units and upstream facilities.”
Although his report said he found Chevron’s review complete, McLaughlin did not endorse the use of 9-chrome. “These opinions,” he wrote, “do not constitute a professional opinion that Chevron should install 9Cr in its repair project.
Wednesday night’s public meeting on the permitting process will take place at 6:30 p.m. at the City Council chambers.
Source: Richmond Confidential [http://richmondconfidential.org/2012/12/18/chevrons-pipe-repair-review-consistent-with-industry-standard-city-expert-says/]